Fasteners for the hayracks are not supplied, since different uses require different types of fasteners. The following cost just a few cents at a hardware store.

Wood Siding & Railings: Use plated lag bolts at least 2-1/2" long with 1-1/4" o.d. washers. Hold empty hayrack in position and drill pilot holes at the "bumps" in top rear bar, which are designed to be gripped by the washers. For extra security, install a third bolt and washer in center of lowest bar.

Masonry: Same as on wood siding, but make the holes in the masonry with a masonry drill bit, large enough to install plastic or lead anchors for masonry bolts.

Iron Railings: For years we used wire coat hangers and pliers to fasten our hayracks. It's easy and inexpensive and the plants soon hide the arrangement.